8GB 2Rx8 1G x 64-Bit PC3-12800 CL11 240-Pin DIMM
  
  ValueRAM's 1G x 64-bit (8GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold
  
  contact fingers. 
  
   
  
   
  
  Features
  
  • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
  
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  
  • 800MHz fCK for 1600Mb/sec/pin
  
  • 8 independent internal bank
  
  • Programmable CAS Latency: 11, 10, 9, 8, 7, 6
  
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  
  • 8-bit pre-fetch
  
  • Burst Length: 8 (Interleave without any limit, sequential with
  
  starting address “000” only), 4 with tCCD = 4 which does not
  
  allow seamless read or write [either on the fly using A12 or
  
  MRS]
  
  • Bi-directional Differential Data Strobe
  
  • Internal(self) calibration : Internal self calibration through ZQ
  
  pin (RZQ : 240 ohm ± 1%)
  
  • On Die Termination using ODT pin
  
  • Average Refresh Period 7.8us at lower than TCASE 85°C,
  
  3.9us at 85°C < TCASE < 95°C
  
  • Asynchronous Reset
  
  • PCB : Height 1.180” (30.00mm), double sided component